Skip to content
Mon–Sat, 8am to 6pmProudly local to Billings, MT · (406) 555-0156
Billings Handyman Pros (406) 555-0156
Home / Services / Light Fixture Installation

Light Fixture Installation in Billings, MT

In December the sun sets in Billings before five o'clock, and for a good part of the winter most of the time spent at home is under artificial light. That's when dim, dated or flickering fixtures become hard to ignore: the single bulb in a basement laundry room, the brass vanity bar in a 1970s Heights bathroom, the plain dome light in every hallway of a West End house built a few years ago. Outdoors, Billings weather is rough on fixtures. Hail cracks glass globes and plastic lenses, wind loosens wall lights and snow and ice get into fixtures that weren't properly sealed. We replace and install all of it, from a single kitchen pendant to a full house of updated lighting.

Our licensed electricians handle every connection, and before anything goes up we check the box, the wiring and the circuit to make sure they suit the new fixture. Heavy chandeliers and pendants get boxes and braces rated for their weight. Recessed and can-light conversions use retrofit housings sized for the ceiling. Outdoor fixtures are installed with gaskets and sealant so water and snow stay out, on boxes that sit flush with the siding. We pair fixtures with dimmers, smart switches and motion sensors when you want them, test everything, and take the old fixtures and boxes with us when we leave.

What this covers

  • Ceiling light and flush-mount replacements
  • Pendants, chandeliers and island lighting
  • Bathroom vanity light bars
  • Recessed and can-light LED retrofits
  • Outdoor wall, porch and garage lights
  • Motion-sensor and dusk-to-dawn fixtures
  • Dimmers and smart switches
  • All wiring by licensed electricians
A note from around here: Basement and bathroom fixtures in Heights bi-levels, dated lighting in postwar Midtown ranches and builder-grade flush mounts in newer West End homes make up most of our lighting work.

How a light fixture installation visit usually goes

Plan the Lighting

We look at the room, the existing boxes and wiring, and the fixture you've chosen, and recommend dimmers, sensors or extra lights where they'd help.

Prep the Box

Old fixtures come down, and boxes are checked and upgraded to handle the new fixture's weight and mounting style.

Install and Connect

The fixture is mounted level and secure, and our licensed electricians make the wiring connections and install any new controls.

Test and Clean Up

We test the fixture, dimmer or sensor, aim outdoor lights, seal exterior housings and take away the old fixtures and packaging.

Outdoor lighting is a safety issue in Billings during the dark months. Steps, driveways and walks are often icy, and it's dark by the time many people get home from work. Motion-sensor lights over the garage and back door, dusk-to-dawn fixtures by the front walk and well-placed step lights cut down on slips and make it easier to see wildlife; deer wander through neighborhoods along the Rims and the river. We position fixtures so they light the path without glaring into neighbors' windows, and we use weather-resistant housings so the lights keep working after a hard winter.

What shapes the price in Billings

The cost of light fixture installation depends on the fixture and the location. Swapping a simple ceiling light on an existing box is quick. Heavy chandeliers, multi-light pendants over an island and fixtures on tall or vaulted ceilings take more time, hardware and ladder work. Recessed LED retrofits vary by the number of cans. Outdoor fixtures require careful sealing and sometimes new mounting blocks on the siding. Adding a new switch, dimmer or motion sensor, or running wiring to a spot that never had a light, adds electrical work. Installing several fixtures at once is the most economical approach. Older homes in the North Elevation and the South Side sometimes have shallow or crowded boxes that need replacing before a new fixture can go up, and we'll tell you about that before we start.

Neighbors often ask

Can you replace an outdoor light that was cracked by hail?

Yes. After summer hailstorms, we replace a lot of cracked globes, shattered lenses and dented fixtures on porches and garages. If your homeowners insurance is covering exterior damage, we can photograph the fixtures before and after. When choosing replacements, we look for metal or heavy glass housings that can better take the next storm, and we seal them properly to keep moisture out.

Can you add lighting to a dark basement room?

Yes. Many Billings basements have one or two bare-bulb fixtures on a pull chain. Our licensed electricians can replace those with LED fixtures, add new fixtures on existing circuits where capacity allows, and install wall switches so you're not fumbling for a chain in the dark. Slim LED wafer lights are a great fit for low basement ceilings because they don't need bulky housings.

Will LED fixtures work in my unheated garage?

Most quality LED fixtures handle cold well, and many are rated to well below zero, which matters in a Billings winter. We choose fixtures rated for cold temperatures and damp locations so they light right away on a cold morning. Older fluorescent shop lights often flicker or struggle to start in the cold, so swapping them for LED is a big improvement.

My new light fixture flickers. What's wrong?

Flickering usually comes from a loose connection, a dimmer that isn't compatible with LED bulbs, or a bulb that doesn't match the fixture. We check the connections and the bulb first, and if a dimmer is the problem, we replace it with an LED-compatible model. If flickering happens throughout the house, our licensed electricians can check for a bigger wiring issue.

Can you install a fixture I bought online?

Yes, as long as it's a listed fixture with all its parts and mounting hardware. We open the box and check the contents before starting, since online orders sometimes arrive with a missing crossbar or a cracked shade, and it's better to find out before the old fixture comes down. If the fixture is unusually heavy, like a large chandelier or a wood-beam pendant, we confirm the ceiling and box can carry it and add a brace if needed before hanging it.

Folks pair this with

Drywall Repair

Drywall Repair →

TV Mounting

TV Mounting →

Furniture Assembly

Furniture Assembly →

Door Repair & Adjustment

Door Repair & Adjustment →

Light Fixture Installation around Billings

Light Fixture Installation is one of 14 jobs our Billings handyman crew handles, in Billings and in nearby communities:

Ready to get your Light Fixture Installation handled?

Send a photo and a sentence — we'll answer with a real price and a real day on the calendar.

Tap to Call (406) 555-0156